TP-Link CPE510 (5GHz 300 Mbps 13dBi Outdoor CPE)

CPE510

5GHz 300Mbps 13dBi Outdoor CPE

Built-in 13dBi 2×2 dual-polarized directional MIMO antenna
Adjustable transmission power from 0 to 26dBm/200mw
System-level optimizations for more than 15km long range wireless transmission
TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
Centralized Management System – Pharos Control
AP / Client / AP Router / AP Client Router (WISP) operation modes
Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely

HARDWARE FEATURES:

Processor: Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc
Memory: 64MB DDR2 RAM, 8MB Flash
Interface:
- 1 10/100Mbps Shielded Ethernet Port (Passive PoE in)
- 1 Grounding Terminal
- 1 Reset Button
Power Supply: Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
- Voltage range: 16-27VDC
Power Consumption: 10.5 Watts Max
- Note: Power drawn from the power source will be higher when using Passive PoE, depending on cable length.
Dimensions (W x D x H): 8.8 x 3.1 x 2.4 in
Antenna Type: Built-in 13dBi 2 x 2 Dual-polarized Directional Antenna
- Beam Width: 45° (H-Plane) / 30° (E-Plane)
Protection:
- 15KV ESD Protection
- 6KV Lightning Protection
Enclosure: Outdoor ASA stabilized plastic material
- IPX5 waterproof Certification

WIRELESS FEATURES:

Wireless Standards: IEEE 802.11a/n (with Pharos MAXtream disabled)
Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled)
Wireless Speeds:
- Up to 300Mbps (40MHz, Dynamic)
- Up to 144.4Mbps (20MHz, Dynamic)
- Up to 72.2Mbps (10MHz, Dynamic)
- Up to 36.1Mbps (5MHz, Dynamic)
Frequency: 5.15~5.85GHz
- Note: Operating frequency may vary depending on regional limitations.
Transmission Power: 23dBm/200mw (Adjustable power by 1dBm)
- Note: Maximum transmission power may vary across channels and regions.

SOFTWARE FEATURES:

Wireless Configurations:
- Pharos MAXtream TDMA Technology
- 802.11a/n Modes
- Selectable Channel Width: 5/10/20/40MHz
- Automatic Channel Selection
- Transmission Power Control
- Dynamic Frequency Selection (DFS)
- WDS Enable/Disable
- Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
- SSID Broadcast Enable/Disable
- Multi-SSID with VLAN Tagging (AP mode only)
- Distance/ACK Timeout Setting
- Wireless MAC Address Filter
- Wireless Advanced: Beacon Interval/RTS Threshold/Fragmentation Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Management:
- Discovery and Remote Management via Pharos Control application
- HTTP/HTTPS Web-based management
- System Log
- SNMP Agent(v2c)
- Ping Watch Dog
- Dynamic DDNS
- SSH Server
System Tools:
- Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory
- Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
- Spectrum Analyzer
- Speed Test
- Ping
- Traceroute
System-level Optimizations:
- Optimized IGMP Snooping/Proxy for multicast applications
- Hardware watch dog

POE ADAPTER FEATURES:

Dimensions (W x D x H): 4.3 x 2.2 x 1.3 in
Interfaces:
- 1 AC Jack with Earth Ground
- 1 10/100Mbps Shielded Ethernet Port (Power + Data)
- 1 10/100Mbps Shielded Ethernet Port (Data)
Button: Remote Reset Button
Power Status LEDs: Green
Input: 100-240VAC, 50/60Hz
Output: 24VDC, 1A Max
- +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
Efficiency: >80%
Certifications: CE/FCC

OTHERS:

Certification: FCC, RoHS, IPX5
Package Contents:
- Outdoor Wireless CPE
- 24V 1A Passive PoE Adapter
- Pole Mounting Straps
- AC Power Cord
- Installation Guide

System Requirements:

Compatible with Google Chrome, Safari, and Firefox browsers for web GUI management.

Environment: