TRENDnet 6-Port Hardened Industrial Gigabit PoE ++ DIN-Rail Switch

TI-UPG62

TRENDnet’s TI-UPG62 is a reliable IP30 unmanaged DIN-Rail PoE++ switch with a rugged housing rated for extreme industrial environments. It offers 4 Gigabit PoE++ ports, a 240W PoE power budget, two dedicated SFP slots, and a 12 Gbps switching capacity. This hardened industrial switch features multiple redundant power inputs and a power failure alarm relay.

Standards	IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3z IEEE 802.3x IEEE 802.3af IEEE 802.3at IEEE 802.3bt
Device Interface	4 x Gigabit PoE++ ports 1 x Gigabit share port 2 x Gigabit SFP slots 6-pin removable terminal block LED indicators DIN-Rail mount Wall mount Grounding point
Data Transfer Rate	Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) Fiber: 2000Mbps (full duplex)
Performance	Data RAM Buffer: 128KB Switching Fabric: 12Gbps MAC Address Table: 1K entries Jumbo Frame: 9KB Forwarding rate: 8.9Mpps (64-byte packet size)
Special Features	Hardened components rated for extreme temperatures Multiple power inputs Auto-Negotiation Auto store and forward architecture Automatic address learning and address aging
DC Power	Input: 52 – 56V DC Compatible power supply: TI-S24052, TI-S24048 (sold separately) Max. consumption: 6.2W (no PD)
PoE	PoE: up to 15.4W per port PoE+: up to 30W per port PoE++: up to 90W per port Power budget: 240W
Terminal Block	Redundant power inputs, alarm relay contact, 6 pin Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG): 12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque: 5 lb. – In / 0.5Nm / 0.56 Nm Wire strip length: 7-8mm
DIP Switch	1: OFF (port 5 SFP on, default), ON (port 5 SFP off) 2: OFF (SFP 1000M, default), ON (SFP 100M)
Alarm Relay Contact	Relay outputs with current carrying capacity of 1A, 24V DC Short circuit mode when two power sources are connected Open circuit mode when only one power source is connected
MTBF	510,304 hours
Housing	IP30 metal case DIN-Rail mount Wall mount Grounding point ESD Protection: Contact: 6kV / Air: 8kV Surge Protection: 2kV
Operating Temperature	– 40° – 75° C (-40 – 167° F)
Operating Humidity	Max. 95% non-condensing
Dimensions	143 x 105 x 36mm (5.6 x 4.1 x 1.4 in.)
Weight	514g (1.1 lb)
Certifications	CE FCC Shock (IEC 60068-2-27) Freefall (IEC 60068-2-32) Vibration (IEC 60068-2-6) IEC 61000-4-2 IEC 61000-4-4 IEC 61000-4-5
Warranty	Lifetime Warranty*