The 8-Port Gigabit Long Range PoE+ Switch, model TPE-LG80, delivers data and power over Ethernet cables to PoE devices such as access points, VoIP phones, and IP cameras. It supports both PoE and PoE+ devices with a 65W PoE power budget. Enable the DIP switch to extend the PoE+ signal up to 200m (656 ft.) at 10Mbps for long distance PoE installations. Plug and play this sturdy metal switch for reliable high-speed PoE networking. Its fanless design is perfect for quiet environments that require silent operation.
Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
Gigabit Ethernet: 2000Mbps (full duplex)
Performance
Switch Fabric: 16Gbps
RAM Buffer: 192KB
MAC Address Table: 4K entries
Jumbo Frames: 9KB
Forwarding rate: 11.9Mpps (64-byte packet size)
Special Features
Long range PoE+ up to 200m at 10Mbps
VLAN port isolation
802.1p Class of Service (CoS)
Wall mountable
DIP Switch
Switch
Status
Function
1
OFF
Ports 1 & 2: Default gigabit PoE+
ON
Ports 1 & 2: Long range PoE+ up to 200m at 10Mbps
2
OFF
Ports 3 & 4: Default gigabit PoE+
ON
Ports 3 & 4: Long range PoE+ up to 200m at 10Mbps
3
OFF
VLAN port isolation disabled
ON
VLAN port isolation on ports 1-4
4
OFF
QoS disabled
ON
QoS Enabled: Video & Voice – High Priority
5
OFF
Port 5: Default gigabit PoE+
ON
Port 5: Long range PoE+ up to 200m at 10Mbps
6
OFF
Port 6: Default gigabit PoE+
ON
Port 6: Long range PoE+ up to 200m at 10Mbps
7
OFF
Port 7: Default gigabit PoE+
ON
Port 7: Long range PoE+ up to 200m at 10Mbps
8
OFF
VLAN port isolation disabled
ON
VLAN port isolation on ports 5-7
*DIP Switch 3 & 8 cannot be enabled at the same time
Power
Input: 100 – 240 V AC, 50/60Hz, 2.5A
Output: 55V DC, 1.3A external power adapter
Max. consumption: 70.6W
PoE
PoE budget: 65 Watts
PoE Mode A: Pins 1,2 for power and pins 3,6 for power
Operating Temperature
0° – 40 °C (32° – 104 °F)
Operating Humidity
Max. 90% non-condensing
Dimensions
240 x 105 x 27mm (9.45 x 4.13 x 1.1 in.)
Weight
592g (20.9 oz.)
Certifications
CE
FCC
Warranty
Lifetime Warranty*
TPE-LG50
The 5-Port Gigabit Long Range PoE+ Switch, model TPE-LG50, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as access points, VoIP phones, and IP Cameras. It supports both PoE (802.3af) and PoE+ (802.3at) devices with a 32W PoE budget. Enable the DIP switch to extend the PoE+ signal up to 200m (656 ft.) at 10Mbps for long distance PoE installations. Plug and play this sturdy metal switch for reliable high speed PoE networking. Its fanless design is perfect for quiet environments that require silent operation.
